Our SLA Printing Services
Stereolithography (SLA) uses a laser to cure various liquid resins into a solid structure. SLA produces parts with high precision, smooth, and detailed surface finish. SLA has comprehensive materials selection and is suitable for most use case scenarios, especially prototyping. Upload your CAD files and get the instant quotation within seconds.
SLA 3D Printing Material Options
Below is available materials for SLA 3D Printing.
Somos@ LEDO
Color
Light Yellow
Tolerance
200 μm or 0.2%
Properties
Finish: Smooth
Elongation at Break: 12%, Suitable for Snapping and
Tapping
Distortion Temperature: 58°C
Note: Sensitive to light; Color-difference may be relatively
obvious
Post Processing
Painting
Max, Printing Size (mm)
580*580*380
Somos@ GP Resin
Color
White
Tolerance
200 μm or 0.2%
Properties
Finish: Smooth
Elongation at Break: 5%, Suitable for General Assembly
Distortion Temperature: 46°C
Note: ABS-like
Post Processing
Painting
Max, Printing Size (mm)
1650*760*580
Somos@ WaterShed XC 11122
Color
Transparent
Tolerance
200 μm or 0.2%
Properties
Finish: Surface has a few air bubbles or fine particles.
Elongation at Break: 7.5%, Suitable for General Assembly
Distortion Temperature: 45°C
Note: Corners will be slightly rounded after printing; Parts
with complex structures will be translucent
Post Processing
Painting / Translucent treatment
Max, Printing Size (mm)
780*780*540
Somos@ Tough Resin
Color
White
Tolerance
200 μm or 0.2%
Properties
Finish: Smooth
Elongation at Break: 13%, Suitable for Snapping and
Tapping
Distortion Temperature: 60°C
Note: Sensitive to light; Color-difference may be relatively
obvious; Parts with thickness less than 1.0mm will be
slightly softer
Post Processing
Painting
Max, Printing Size (mm)
580*580*380
Somos@ Taurus
Color
Navy Blue
Tolerance
200 μm or 0.2%
Properties
Finish: Rough with Visible Layering
Elongation at Break: 15%, Suitable for Snapping and
Tapping
Distortion Temperature: 62°C
Note: Parts with thickness less than 1.0mm will be slightly
softer
Post Processing
Painting
Max, Printing Size (mm)
580*580*380
Somos @ lmagine Black
Color
Black
Tolerance
200 μm or 0.2%
Properties
Finish: Rough with Visible Layering
Elongation at Break: 5%, Suitable for General Assembly
Distortion Temperature: 50°C
Note: ABS-like
Post Processing
Painting
Max, Printing Size (mm)
580*580*380
Standard Resin
Color
Creamy-White
Tolerance
200 μm or 0.2%
Properties
Finish: Smooth
Elongation at Break: 6%, Suitable for General Assembly
Distortion Temperature: 45C
Note: Parts with thickness less than 1.5mm will be slightly
softer
Post Processing
Painting
Max, Printing Size (mm)
1650*760*580
Tough Resin Green
Color
Light Green
Tolerance
200 μm or 0.2%
Properties
Finish: Smooth
Elongation at Break: 6.8%, Suitable for Snapping and
Tapping
Distortion Temperature: 56.4°C
Note: Strong hardness; Will not deform easily
Post Processing
Painting
Max, Printing Size (mm)
780*780*540
Design Rules
Design Guidelines for SLA
SLA Case Gallery
Take a look at SLA prototypes.
Somos® Tough Resin
Somos® WaterShed XC11122
Somos® Taurus